Do you know the pool heat pump installation?As we all know, swimming pool heat pump can extend the swimming season, but if installed improperly, Its function can’t perform well.Today let's learn about the matter of pool heat pump installation.
The following are some precautions for swimming pool heat pumps installation introduced by pool heat pump after-sales engineers:
(1) Please avoid pool heat pumps installation in the following places to avoid failure of the swimming pool heat pump:
*Places containing lubricants such as mineral oil.
*Factory where the power supply changes too much.
*The recirculation flow rate is less than 2300 m3/Hr.
*Places with strong electromagnetic fields.
*High temperature areas with corrosive gas, such as sulfur gas.
*In enclosed spaces or where there is no air recirculation.
*Like a kitchen, oil can penetrate into the pool heat pump.
*Places with flammable gas or materials.
(2) The supporting surface (base/platform) is best to be built above the ground to avoid contact with moisture in the ground/garden, and it must also be able to support the entire weight of the equipment. Make sure it does not make noise due to vibration. Allow enough condensate and rainwater to drain from the bottom of the unit. If possible, the base should be at the same or slightly higher position as the filter system equipment platform.
(3) Ensure that the drain pipe is in an open state. Switch the pressure regulator regularly to eliminate lime deposits. In a non-icing environment, connect the drain pipe and the pressure reducing valve vertically downwards.
(4) Do not insert your fingers or any other objects into the air inlet and outlet of the swimming pool heat pump. Serious injuries may occur when the fan rotates.
(5) Do not touch the cooling fin of the heat exchanger, it is very sharp and may cut your hands.
(6) Do not operate the swimming pool heat pump with wet hands to avoid electric shock.