How to use air source heat pump water heaters to save electricity? Remember to use these tips!

When it comes to the power saving of air source heat pump water heaters, many customers who have used it indicate that it is very power-efficient, but many customers hold the opposite attitude and think that it does not save power at all. Does the air source heat pump water heaters save electricity or not when it is used? Regarding this question, I can tell you with certainty that as long as there is no problem with the product quality and operation method, the air-energy water heater is definitely energy-saving. Let me introduce how to use the air source heat pump water heaters to save electricity tips.


1. Choose a reasonable air source heat pump water heaters according to the household entrance and water usage


You should according to your household population and water usage when choosing an air source heat pump water heaters. For example, if an adult uses 50L of water a day, a family of three can choose a 150L water heater; but if you have the habit of taking a bath, it is recommended to choose a 200L water heater. If the storage capacity of the air-energy water heater is too small, it will cause insufficient hot water; if it is too large, it will increase power consumption.




2.Choose a reasonable installation location


Air source heat pumps heat by absorbing free heat energy in the air. If installed in an unventilated place, it will interfere with the efficiency of the water heater in absorbing air heat, which may cause the heating efficiency of the air source heat pump water heaters to decrease. Therefore, when installing an air source heat pump water heaters, it is best to install it in a ventilated place. For example, a semi-enclosed balcony is a very good installation location. Choose frequency conversion air source heat pump water heaters as much as possible. Compared with ordinary air source heat pump water heaters, there is a frequency converter in the frequency conversion air source heat pump water heaters. In winter, the inverter operates the water heater to turn on the quick heating mode, which not only improves the cold resistance of the air source heat pump water heaters, but also improves the heating effect and efficiency of the air source heat pump water heaters. In summer, the frequency converter operates the water heater to turn on the power saving mode. Although the heating efficiency is average, it can save electricity to the greatest extent. How much power is saved by the frequency conversion air source heat pump water heaters? Normally, it depends on whether the water heater saves electricity, the key is the energy efficiency ratio. The higher the energy efficiency ratio, the more electricity the air source heat pump water heaters saves.


Previous: How does the heat pump work with jet enthalpy technology?
Next: Heat Pump Pool Heater from Powerworld: Keep Warm While Saving Money